CMA Dishmachines CMA-66H Guide de dépannage télécharger pdf (Page 11)

Installation

1. The dishwasher has a 6ft. 3/4" I.D. drain hose. The maximum drain height

connection must not exceed 3 ft.[9 m].

The recommended drain height is 17" [.4 m] or less above the oor.

2. The drain hose is secured to the rear of the machine by a clamp to maintain a

goose-neck bend in the drain hose.

DO NOT REMOVE THE DRAIN HOSE RETAINING CLAMP.

DO NOT STRETCH THE DRAIN HOSE.

3. Install the drain hose to a "WYE" drain tting. Connection to a "TEE" tting will

prevent the dishwasher from draining completely.

4. The maximum drain ow is 8 U.S. gpm/7 Imp. gpm/30 L.P.M.

5. Make sure the drain hose does not kink. Kinks will prevent the dishwasher

from draining completely, and the dishwasher will overow out the front door.

NOTE: DO NOT CONNECT THE DRAIN HOSE TO A DISPOSER.

THE DISHWASHER WILL NOT DRAIN CORRECTLY.

Drain Connections

ATTENTION

Do not connect the drain hose to a disposer. The dishwasher will not drain correctly.

The dishwasher flexible drain hose

must be connected to a WYE fitting.

Do not connect the dishwasher

flexible drain hose to a TEE fitting.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Pas de commentaire

CMA Dishmachines CMA-66H Guide de dépannage Page 11